Click image to view full size image
Huarui Aluminum honeycomb is adhesively-bonded of the aluminum foil, which produces one of the highest strength/weight and the highest surface-to -volume ratio of any structural material. Our aluminum honeycomb is made from 3003H18 and 5052H18 aluminum alloy foil.
Supplied conditions:
Expanded or unexpanded
Full blocks or cut slices
Perforated or imperforated
Corrosion treated or untreated
Die cut size
Typical products
Working temperature : -55 to 175 ºC in long term
Density of Aluminum Honeycomb
Cellsize |
Foil Thickness |
Density kg/m3 |
1/30" |
0.03mm |
252.19 |
1/25" |
0.03mm |
210.16 |
1/15" |
0.04mm |
168.13 |
1/8" |
0.06mm |
137.81 |
1/6" |
0.06mm |
100.88 |
1/5" |
0.06mm |
80.06 |
1/4" |
0.06mm |
63.05 |
1/3" |
0.06mm |
50.44 |
3/8" |
0.06mm |
42.03 |
Slant Honeycomb (30°45°60° )
The most commonly used type of vent is based on aluminum honeycomb mounted in an extruded aluminum frame. The honeycomb agent has a very high open area and therefore allows good air flow with minimal pressure drop. In order to achieve the best shielding performance two layers of honeycomb are used orientated at 90°to one another, although this is not always necessary on some less demanding applications. The exterior facing honeycomb layer can be angled (usually 45°)so as to direct airflow in a particular direction or to deflect rain. 
